JConcepts Jco0373 1966 Chevy C10 Step-Side Clear Body, with Ultra Rear Wing

About this part

A clear 1966 Chevy C10 step-side body with the Ultra rear wing, sized for a 13-inch wheelbase. Build notes: Trim all additional pieces with quality curved scissors and sand them smooth before painting. Plan attachment points and paint all materials before assembly. Apply the included window mask to the inside of the shell, then spray only polycarbonate-approved paint on the inside in light coats. Use three to four light coats over the body, roll bar and wing assembly, and let each coat dry according to the paint can. The rear roll bar and lower wing support mount to the tailgate and fender wells with double-sided tape or Shoe Goo (neither included). The upper wing attaches with double-sided tape (not included).

Specifications

• The inside body width is 11.75 inches at the front and 12.00 inches at the rear. The body fits a 2WD SCT wheelbase and standard SCT width chassis layouts. Drag racing tires #3193 (front), #3194 (rear), and wheels #3387 are used. Plan your build, take measurements and modify your platform to fit within the body boundaries.
• Fits: Losi 1:10 SCTE 3.0, Tekno 1:10 SCT410.3 Short Course, Losi 1:10 TLR 22SCT 3.0, Losi 1:10 Tenacity SCT 4WD, Associated Trophy Rat, and

Fits