About this part
Monster Blower clip-on universal heat sink and fan for the 1/8 Arrma Kraton, Notorious, Outcast, Senton, Talion and Typhon BLX, or for custom projects. It is sized for a 3 cell setup. The fan forces airflow over the motor heat sink to improve cooling, efficiency and performance.
Features
- Forced airflow over the motor heat sink
- Large 50x50x11mm 7-blade fan
- Clip-on design for simple installation
- Black and blue anodized aluminum heat sink
- EC5 adapter with 12AWG and 24AWG silicone wire
You will receive
- One (1) clip-on heat sink with fan
- One (1) EC5-style adapter connector
Requirements
- Loosen the fan screws during installation, then tighten them again afterward to reduce tweaking and binding of the fan
- Medium strength thread lock (blue) on the fan mount screws
- Protect the fan blades
- This system uses an EC-5 connector. For a different connector, switch connectors or use an adapter.
Specifications
- Fan size: 50x50x11mm
- Input voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
Comments
- If you are running a single 6 cell pack, order AON505F02 instead.
