Home / Hot Racing / Gears - Spurs / ERVT52M01
30-day returns · Secure checkout by Stripe · We accept Visa, Mastercard, American Express, Discover, Apple Pay, Google Pay and Link
A 52-tooth, 1.0 modulus hardened steel spur gear from Hot Racing for the Traxxas E-Revo 2 in 6S and 8S form, along with the Pro Scale 2WD Sand Car, X-Maxx and XO-1. Highlights: CNC machined hardened steel with a black oxide finish Tooth count laser etched on the gear Included: One 52-tooth, 1.0 modulus steel spur gear Setup: Do not use the pin system to set gear mesh. Set it by hand instead, following the Adjusting Gear Mesh section on page 22 of the Traxxas manual. With the pins removed, loosen the four 4x16mm button-head cap screws on the bottom. Slide a narrow strip of notebook paper into the mesh, slide the motor and pinion into the spur gear, then tighten the four screws and pull the paper out. A fresh strip should pass through the gears without binding.
