Tekno RC NB48 Complete Rear Differential

About this part

A complete rear differential assembly for the Tekno NB48. It includes the ring gear, and the pinion listed below must be used with it.

You will receive

• Two M2.5 x 9.8mm pins for the outdrives
• Two TKR5114X differential outdrives (front and rear, two pieces)
• One TKR5143 diff seal
• Two TKR5144 diff o-rings
• Two TKR5145B 6x17mm shims
• Two TKR5149 differential cross pins
• One TKR5113 differential case (front, center and rear, one piece)
• One TKR5150 differential gear set (internal gears only)
• One TKR5302 differential ring gear, straight cut, 40 tooth
• Two TKRBB08165 8x16x5mm bearings

Note

• The ring gear is the 40 tooth TKR5302 and must be used with the TKR5152 differential pinion gear.
• IN THE BOX:
• Included with the NB48 kit, and can be used as a replacement part for that vehicle. It should be a direct fit for the stock part or can be added as a new feature for the NB48 and NB48.3. Check the kit manual before buying, since no additional items are needed.

Fits