Microscale Industries Micro Sol Setting Solution, 1 oz

About this part

Micro Sol is designed for the most difficult irregular surfaces on models. It completely softens the Microscale decal so it drapes over the surface and conforms to irregularities without distortion, becoming part of the painted finish. Coat with Micro Sol for only a few seconds, then leave it alone. Do not touch the decal until it is dry, since it is very soft at this stage and easily damaged. For best results, treat the surface first with Micro Sol to prepare it and enhance the adhesive, and make sure it is free of particles that could get under the film. When the decal no longer moves easily, brush on Micro Sol with a small flat brush using as few strokes as possible. Let it dry undisturbed. One application is usually enough, though a second can help if needed.

Fits