Home / LRP / Brushless Motors / LRP500906
30-day returns · Secure checkout by Stripe · We accept Visa, Mastercard, American Express, Discover, Apple Pay, Google Pay and Link
The 175mm LRP Hall Sensor Level Converter is for motors whose Hall sensor signals are not standardized and that do not run properly on the Flow X. The Hall sensors in these motors push their signals above the level the Flow X can handle. When that happens, the start-up sequence can be interrupted and never finish. The ESC may then ignore throttle input, the blue LED may freeze solid on, and pressing SET or MODE shows a green confirmation but does not enter transmitter setup or mode programming. The motor may not drive at all. The converter lowers the Hall sensor signals of these motors to a level the Flow X can handle. That is its only function. It offers no other advantage or disadvantage and gives no performance increase. SUGGESTED STEPS: 1. Run your desired motor on the Flow X with a regular Hall sensor wire. If the motor performs properly, keep using the regular wire. FITS: Arrma 1:10 2WD ADX-10 Buggy Arrma 1:10 2WD Raider BLX Buggy Associated B44.x Associated RB-10 buggy Associated RC-10 B2 Buggy Associated RC-10 B3 Buggy
