DU-BRO S10 Square Fuel Tank, 10 Oz

About this part

A 10 oz square fuel tank from DU-BRO. It resists splitting or cracking from vibration or pressure and can be used in pressurized fuel systems. The one-piece clunk has built-in fuel barbs. A protruding front lip protects fuel lines from being crimped. The filler cap seals on a smooth machined neck. Single or twin vent options, soft brass tubes and a clunk pickup for even fuel flow are included. Illustrated assembly instructions are provided. USE: Can be used with Glo-Fuel or gasoline. Gasoline use requires the DUBQ0675 Gasoline Conversion Stopper, sold separately. INCLUDED: One 10 oz fuel tank Two copper pipe pieces, about 78mm long with an outside diameter of 3.2mm Fuel hose with an inside diameter of about 2.4mm, about 100m long

Requirements

• Assembly, hobby knife, Phillips screwdriver

Specifications

• Capacity: 10 oz (300cc)
• Height: 2-1/4 in.
• Width: 2-9/16 in.
• Length: 4-7/8 in.

Notes

• If the installation uses gasoline or diesel, replace the rubber plug and silicone tubing with suitable material.
• FITS: General hobby RC aircraft parts.

Fits